Em-Dome modular rooflights

Ventilation options

Em-Dome in opal diffused with Em-Collar and hinged opener

Em-Dome in opal diffused with Em-Collar and hinged opener

Em-Dome in HeatReflect finish with PVC 300mm upstand and rotating vents

Em-Dome in HeatReflect finish with PVC 300mm upstand and rotating vents

Permanent trickle

Permanent ventilation is provided by means of spacer washers inserted in the Em-Dome fixings.

Read more… »

This provides a continuous 5 to 10mm weatherproof vent around the perimeter of the rooflight which suits areas such as corridors and other areas where non-controllable background ventilation is required.

Fitted to Em-CurbEm-Dome fitted to Em-Curb with permanent trickle ventilation

Fitted to builder’s curbEm-Dome fitted to builder’s curb with permanent trickle ventilation


Controllable trickle

Controllable trickle ventilation is an adjustable slot vent which is fitted to two or four sides of a PVC Em-Curb, Em-Collar or T-Collar.

Read more… »

With the vents on two sides the unit can provide 8000mm² ventilation area which assists with Building Regulations compliance.

Fitted to Em-CurbEm-Dome fitted to Em-Curb with controllable trickle ventilation

Fitted to builder’s curbEm-Dome fitted to builder’s curb with controllable trickle ventilation


Controllable rotating

Controllable rotating vents are a fully insulated unit with enhanced thermal properties and a greater vent area than the Trickle Vent options.

Read more… »

The vents can be fitted to two or four sides of a PVC Em-Curb or Em-Collar. With the vents on two sides, the unit will provide a minimum of 11,000mm² ventilation area. This increases with the size of the rooflight. Tested and certified according to EN 1873 – Watertightness.

Fitted to Em-CurbEm-Dome fitted to Em-Curb with controllable rotating vents

Fitted to builder’s curbEm-Dome fitted to builder’s curb with controllable rotating vents


Hinged manual spindle opening

Hinged opening vents provide the maximum ventilation area to allow rapid air movement.

Read more… »

The manual spindle operation can be opened to any point up to 300mm and is operated by a Winding Rod available separately. Tested and certified according to EN 1873 – Watertightness.

Fitted to Em-CurbEm-Dome fitted to Em-Curb with hinged manual spindle opening
Fitted to builder’s curbEm-Dome fitted to builder’s curb with hinged manual spindle opening


Hinged electric actuator opening

Hinged opening vents provide the maximum ventilation area to allow rapid air movement.

Read more… »

The electric actuator operation allows control by a wall mounted open/close switch and also options for wind, rain and temperature sensors with a range of control panels available separately. Actuators are either 24V DC or 230V AC with options to open to 400 or 600mm.

Fitted to Em-CurbEm-Dome fitted to Em-Curb with hinged electric actuator opening
Fitted to Em-CollarEm-Dome fitted to Em-Collar with hinged electric actuator opening


Powered ventilation

Where natural ventilation is insufficient, Em-Domes can be supplied with Vent Axia Solo or Centrif Duo centrifugal extract fans. These are mounted in the side wall of Em-Curb PVC-u 150/v or Em-Curb PVC-u 300/s.

Read more… »

These high performance extract fans are specifically designed for ventilating internal bathrooms, WCs and other small rooms. They have an extract performance of 85 m³/hr (24 l/s) or 220 m³/hr (61 l/s) respectively and can be fitted in one or more sides. Where greater air movement is required, white PVC lined fan collars with pre-cut apertures are available to enable fitting of larger axial fans (e.g. Vent-Axia T-series).

This allows either new high capacity fans to be installed or existing fans to be reinstalled through the rooflight unit.

Fitted to Em-CurbEm-Dome fitted to Em-Curb with powered ventilation
Fitted to Em-CollarEm-Dome fitted to Em-Collar with powered ventilation